隨著市場經濟的逐步發展，市場對焊接專機的需求也在不斷增大，但如果在使用過程中操作不當，勢必將會給生產企業帶來很多的不必要的人體傷害或者是經濟損失，下面給您簡述一下操作山東焊接專機時應注意的一些事項。

With the gradual development of the market economy, the demand for welding machines in the market is also increasing. However, if operated improperly during the use process, it will inevitably bring many unnecessary human injuries or economic losses to production enterprises. Below is a brief introduction to some precautions when operating Shandong welding machines.

(1)焊接專機操作人員應該嚴格做好防護措施，穿戴好防護衣物，工作場內不宜堆放易燃、易爆等物品，以防止發生火災或者觸電等事故;

(1) Welding machine operators should strictly take safety measures, wear protective clothing, and avoid stacking flammable, explosive, and other items in the workplace to prevent accidents such as fire or electric shock;

(2)焊接專機適合在室內操作，并配備好可靠的地線且電焊機導線長度不宜過長;

(2) The welding machine is suitable for indoor operation and is equipped with a reliable grounding wire. The length of the welding machine wire should not be too long;

(3)當需要多臺焊接專機并列安裝時，要保證各臺專機之間的距離達3米，并且必須接在不同的刀線上有獨立的開關控制;

(3) When multiple welding machines need to be installed in parallel, it is necessary to ensure a safe distance of 3 meters between each machine, and independent switch control must be connected to different cutting lines;

(4)在焊接專機開始使用前，應該對整臺焊接專機做充分的檢查，確保氣壓、液壓系統無泄漏沒有任何故障時才能使用;

(4) Before starting to use the welding machine, the entire welding machine should be thoroughly inspected to ensure that there are no leaks or malfunctions in the pneumatic and hydraulic systems before use;

(5)焊接專機的電路應長期做檢查，以保證機器的正常動作;

(5) The circuit of the welding machine should be inspected for a long time to ensure the normal operation of the machine;

此外檢查焊接面罩應無漏光、破損。焊接人員和輔助人員均應穿戴好勞保用品。

In addition, the welding mask should be checked for light leakage and damage. Welding personnel and auxiliary personnel should wear protective equipment.

自動焊接專機焊鉗、電源線以及各接頭部位要連接可靠、絕緣良好。不允許接線處發生過熱現象，電源線斷頭不得外露，應用電膠布包好。

The welding pliers, power cables, and various joint parts of the automatic welding machine should be reliably connected and have good insulation. Overheating is not allowed at the wiring point, and the broken end of the power cord should not be exposed. It should be wrapped with electrical tape.

操作焊接專機時應注意的一些事項就講解到這里了，希望能夠給您好的幫助，更多事項就來我們網站http://www.ykwanda.com咨詢了解吧！

That's all we need to pay attention to when operating the welding machine. We hope it can provide you with good help. For more information, please visit our website http://www.ykwanda.com Consult and understand!